Have you ever watched a movie or listened to a song with incredible sound effects and wished that you could create those same sounds in your home?
Well, now you can! Sound bars have become extremely popular over the past few years, and for good reason. They allow you to enjoy high-quality sound without taking up a lot of space.
However, a common problem that many people run into is their subwoofers moving on the floor. In this blog post, we will take a look at some common causes of this problem and ways to fix it.
What causes subwoofers to move and what is the fix?
Subwoofers move due to an electromagnet, which is part of every speaker. The magnet allows the subwoofer to move back and forth as it receives power from the amplifier.
This movement can be an issue when the subwoofer is enclosed within a sealed box.
When the subwoofer moves, it pushes the air inside the box, which in turn changes the pressure within the box and causes the diaphragm to move back and forth. This back-and-forth movement causes audible feedback in the music heard by the listener.
To prevent this from happening, you will need to build a port for the subwoofer. This is a simple modification that can greatly reduce the amount of feedback you hear when using your subwoofer.
Different kinds of subwoofer movement:
A subwoofer is a speakers driver that is designed to reproduce low frequencies, or bass. Subwoofers are most commonly placed in the back or side of a home theater or stereo system, but they can occasionally be found in other settings.
There are two basic types of subwoofer movement:
Passive:
Passive subwoofers have only one port (the opening in the enclosure that allows air to move in and out). They are typically less expensive, but their low bass output makes them less suited for larger home theater systems.
Active:
Active subwoofers use both ports to add bass output. In addition to having better bass output, active subwoofers are capable of greater control.
How to fix and prevent movement?
When you turn on your subwoofer, you may notice some movement in your floor. Most subwoofers come with rubber feet that sit on the base of the subwoofer.
These feet need to have some friction in order to keep your speaker from moving, but they can also damage your floors if they’re too tight or slide around too easily.
To prevent movement in your floor, there are a few things you need to do. First, make sure you use the correct size of feet. Smaller subwoofers need smaller feet, so read the manufacturer’s recommendations for the correct size and type of feet for your subwoofer.
Next, make sure you use enough feet. Every subwoofer should come with a recommended number of feet. Make sure you follow the recommendations to get the best results.
If your subwoofer feet aren’t tight enough, you might need to use some silicone floor adhesive. This will create a secure connection and make it harder for the feet to fall off.
How to fix moving subwoofers on hardwood?
When it comes to subwoofers, there’s only one rule to follow: never, ever place them on a hardwood floor. It’s that simple.
The vibrations created by the subwoofer (it’s a woofer, remember?) cause the surface to buckle and warp, which will drastically affect the sound quality of the speakers.
Now, you can always remedy the issue by purchasing specially made rubber pads to place underneath the subwoofer, but this can be costly.
There’s a better way: by hiding the subwoofer underneath it. While you may not have heard of this before, it actually works great.
Pull out your tape measure and measure the depth and width of the subwoofer. Get a pen and draw the measurements on a piece of paper.
Cut out the cardboard and spray it with a fine layer of black spray paint. This will serve as the subwoofer’s enclosure. Be very careful not to spray any spray paint on the subwoofer itself.
Once the paint dries, you are ready to place your subwoofer in the cardboard and screw it in place.
Should subwoofer sit on floor?
Most subwoofers will sit on the floor, but it’s important to consider a few things first.
First, a subwoofer generally produces bass frequencies, which are the lowest ones, so a solid floor will help keep it in place.
You should also make sure the subwoofer is in a relatively open space. It shouldn’t be against a wall or in a corner, and it should be positioned so that it doesn’t block the entrance to a room or doorway.
If you have a subwoofer and floor stand speakers, the subwoofer should be placed on the floor directly under the speakers. However, if you have in-ceiling speakers, the subwoofer can be placed on a stand.
How do I stop my subwoofer from sliding?
One of the challenges of any subwoofer installation is finding a way to secure the subwoofer to its base.
A subwoofer that isn’t secured properly can slip off of the base or wobble, which can cause problems with the amplifier, damage the subwoofer, and ruin your listening experience.
There are several ways to secure a subwoofer to its base, including using sticky foam or towels and attaching straps. However, there are some disadvantages to these options.
Sticky foam or towels can create a messy and uncomfortable installation, and straps may slip off of the subwoofer over time. The best approach to securing your subwoofer is to purchase a subwoofer base with a secure attachment plate.
How to strap down a subwoofer?
Subwoofers can be very heavy, and you want to make sure that they are properly secured so that they don’t fall over and break.
To strap down a subwoofer, start by making sure that it is sitting flush against the wall, and clamp it to the wall using a heavy duty strap.
Next, attach the subwoofer straps to the studs in the interior of the room. After that, lift the subwoofer, center it, and screw the straps into the wall studs. Make sure that you use the proper sized screws so that the screws penetrate the wood securely.
Before installing your subwoofer, you will want to perform a quick test to ensure that the straps are holding your subwoofer in place.
Simply lift the subwoofer a few inches off the floor, and then place weight on the subwoofer. If the subwoofer falls over, you should tighten the straps that attach to the wall studs.